Cappuccino TX3 Product Specifications
Cappuccino
TX3 has not only a dazzling outline, but also full functions.
Four USB ports make the expansion easier. Two FireWire (1394)
ports speed up fire transfer and offer the other choices for
expansion. Meanwhile, Infrared port (IrDA) is designed at
front panel and users will be able to enjoy instant short
range point-to-point data transmission without moving the
device.


( Discontinued Model Please look at Mocha 5043 or Mocha 7043 Junior)
 |
|
 |
Cappuccino
TX3 has not only a dazzling outline, but also full functions.
Four USB ports make the expansion easier. Two FireWire
(1394) ports speed up fire transfer and offer the other
choices for expansion. Meanwhile, Infrared port (IrDA)
is designed at front panel and users will be able to
enjoy instant short range point-to-point data transmission
without moving the device. |
|
In
order that you can achieve better procurement of key
components and cost control, we ship the barebone or
SKD system only. The barebone system shipped out is
normally without CPU, HDD, and RAM. Therefore, we provide
an easily way on proper assembly of additional components. |
Processor
|
Intel
Socket 370 Pentium-III & Celeron Tualatin Processor
up to 1.2GHz |
Memory
|
0KB
onboard and upgradable to 512MB using the 144pins SODIMM
Module |
Video
Chipset |
Intel
i815E, with full Motion Video Acceleration, Hardware
Monitor Compression for SW MPEG2 Playback, Motion
Playback at 30fps. |
Video
Memory |
Up
to 32MB of Shared Memory
Dynamic
Video Memory Technology |
Hard
Disk Option |
1
x 2.5" x 8.5 ~ 12.5mm Thickness
Support PIO Mode up to 4, Multiword DMA Mode 0, 1, 2
and Ultra DMA/33/66 |
Optical
Drive |
ATAPI
IDE High Speed Interface (Notebook Size) CD / DVD /
CD-RW / Combo Drive Optional |
External
VGA Resolution |
1280
x 1024 16.7M Colors, 1600 x 1200 |
Audio |
Built-in
16bit Stereo (sound blaster / Adlib compatible)
Full Duplex 3D Stereo Sound
Built-in Speaker |
IO
Ports |
1x
9pin Serial Port (16550A)
1x 25pin Parallel Port (EPP / ECP)
1x RJ45 LAN Port (LAN Onboard)
1x RJ11 Fax/Modem Port
1x 6pin PS/2 Keyboard Port
1x 6pin PS/2 Mouse Port
1x Microphone-in Port
1x Line-Out Port
2x 1394 Firewire Ports
4x USB1.1 Ports
1x VGA Port
1x IrDA Port
1x S-Video Out Port
1x AV Port |
Electrical
Requirements |
Line
voltage 110V (90V to 130V AC) or 230V AC (180V to 260V
AC)
Frequency: 47 to 63Hz, single phase
Power in: DC 18V / 3A
Max. Power 54 Watts |
Environmental
Requirements |
Operation
Temperature: 10C to +35C
Storage Temperature: -10C to +55C
Relative Humidity 5% to 95% non-condensing
Altitude: 0 to 10,000 Feet |
Operation
System |
Windows
9x, ME, NT, 2000, XP |
Weight
& Size |
System
approximately: 1.9Lbs
System Dimensions: 156mm x 146mm x 55mm (6" x 5.75"
x 2.25" |
 |
Moreover,
Cappuccino TX3 is equipped with a smart fan
that is designed to detect and regulate the temperature
in the device so that it will be always kept in
a good condition. |
|
Cappuccino
TX3 Motherboard Specifications
Intel®
815 |
Processor
|
Socket
370 for Intel® Pentium® III / Celeron®
/ Taulatin Processor
Upgradable more than Pentium III 1.2GHz |
Chipset |
Intel®
815
Intel® FW82801 AA (ICH) |
Memory |
One
144 pin DIMM slot for PC100/PC133 SDRAM
Upgradable 128/256/512MB |
Video |
Intel®
82815, Video Memory (shared Memory)
Support up to 1280 by 1024pixel at 24bits per pixel |
Speakers
and Audio |
Built-in
16bit Stereo (Sound Blaster / Adlib Compatible) |
Form
Factor |
ATX
form factor, 6 layer PCB |
IO
Ports |
Four
USB Ports (12 Mbps)
Two FireWire (1394) Ports (400 Mbps each)
One 25pin Parallel Port (EPP / ECP)
One 9pin Serial Port (RS232)
VGA Port
RJ45
RJ11
IrDA
One 3.5mm Line Out Port (Using Active Speaker)
One 3.5mm Microphone in Port
One S-Video Port
One AV Video Port
One 6pin PS/2 Mouse Port
One 6pin PS/2 Keyboard Port |
Power |
AC/DC
Adapter
Line Voltage: 110Vac (100 to 130Vac) or 230Vac (180
to 260Vac)
Frequency: 47 to 63 Hz (Single phase)
Power in: DC 18V/54A
Max. Power Consumption: 45W
AC Recovery On/Off Control |
BIOS |
4M
bit Flash ROM
AMI BIOS with enhanced ACPI feature for Windows 95/98/ME/2000/XP
compliance, Green, PnP, DMI, INT13(>8.4GB) IDE#1~#4,
SCSI, LS120, ZIP&CD-ROM bootable |
CPU
Fan Connector |
3pin,
+5V, 90mA(0.45W) |
|